Supercharger Ribbed Belt, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front engine cover -1- upward.

-- Remove the front noise insulation -1-. Refer to Front Noise Insulation Removing And Installing .

Fig 2: Noise Insulation Panels

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of damage due to reversed running direction on a used ribbed belt.

Before removing ribbed belt, marking running direction with chalk or felt-tip pen for reinstallation later.

-- Pivot the tensioner clockwise in direction of -arrow- to release the tension on the ribbed belt.

Fig 3: Remove The Ribbed Belt And Secure The Tensioning Element With T10060 A.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the ribbed belt and secure the tensioning element with Locking Pin T10060A.