LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S5 4.2, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 524 (3.0L - Crankshaft & Cylinder Block - Engine Code(S): CCBA, CGXC & CTUB (Sedan)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Ribbed Belt TENSIONER, Removing And Installing, Vehicles With Electro-Mechanical Power Steering >> Installing

Ribbed Belt TENSIONER, Removing And Installing, Vehicles With Electro-Mechanical Power Steering: Installing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING, VEHICLES WITH ELECTRO-MECHANICAL POWER STEERING .

-- Install the left front coolant pipes. Refer to FRONT LEFT COOLANT PIPES, REMOVING AND INSTALLING .

-- Install the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals