Valve Dimensions
NOTE:
Intake And Exhaust Valves Must Not Be Reworked. Only Lapping Is Permitted.
| Dimension | Intake Valve | Exhaust Valve | |
|---|---|---|---|
| Diameter a | mm | 33.85 ± 0.10 | 28.0 ± 0.1 |
| Diameter b | mm | 5.98 ± 0.01 | 5.96 ± 0.01 |
| c | mm | 103.97 ± 0.20 | 101.9 ± 0.2 |
| α | ∠° | 45 | 45 |
WARNING:
Risk Of Injury If Exhaust Valves With Sodium Filling Are Disposed Of Improperly.
- Cut exhaust valve with sodium filling into 2 parts with a metal saw between shaft center and valve plate. While doing this, do not come into contact with water.
- Throw at the most 10 such sawed exhaust valves in a bucket filled with water and step back immediately.
- When there is contact with water, a sudden chemical reaction occurs which burns the sodium filling.
- The treated parts may then be discarded through conventional disposal channels.