-- Tighten The Bolts As Follows While The Camshaft Adjuster Is Still Held Under Tension.

Step	Bolt	Tightening Specification
1.	-1- to the exhaust camshaft	60 Nm
1.	-2- to the intake camshaft	60 Nm

-- Position the :T40079 on the exhaust camshaft adjuster on the right cylinder head.

Fig 1: Positioning Adapter T40079 On Exhaust Camshaft Adjuster At Right Cylinder Head

Courtesy of AUDI OF AMERICA, LLC

-- Position the :VAG1332 with the :VAG1332/9 on the :T40079 .

-- Have a second technician pre-tension the camshaft adjuster in the direction of -arrow- to 40 Nm.

Step	Bolt	Tightening Specification
1.	-1- to the intake camshaft	60 Nm
1.	-2- to the exhaust camshaft	60 Nm

-- Remove the :T40079 .

-- Remove the :T40070 on both cylinder heads -arrows-.

Fig 1: Mounting Camshaft Locating Tool T40070 To Both Cylinder Heads

Courtesy of AUDI OF AMERICA, LLC