Overview - Noise Insulation, Except AUDI RS5

Front noise insulation. Refer to OVERVIEW - NOISE INSULATION, EXCEPT AUDI RS5 => Front Noise Insulation 

Rear noise insulation. Refer to OVERVIEW - NOISE INSULATION, EXCEPT AUDI RS5 => Rear Noise Insulation 

Front Noise Insulation 

Fig 1: Front Noise Insulation

1. Noise Insulation
   • Removing:
   • The front wheel spoiler is removed. Refer to OVERVIEW - FRONT WHEEL SPOILER .

     -- Remove the bolts -1 and 2- and remove the noise insulation toward the rear under the bumper.

   • When installing, slide the front noise insulation in under the bumper.
2. Bolt
   • 5 Nm
   • Quantity: 2
3. Quick Release
   • Rotate 180° to the left to remove.
   • When installing, the connection must engage when rotating.
4. Washer
5. Rear Noise Insulation
6. Lock Carrier

Rear Noise Insulation 

Fig 2: Identifying Rear Noise Insulation Overview

1. Rear Noise Insulation
   • Loosen the 3 rear quick-release fasteners on the noise insulation.
   • Loosen the quick-release fasteners -6- and remove the noise insulation toward the rear.
2. Crossbrace
3. Transmission Crossmember
4. Spring Nut
   • Slide into the transmission crossmember as shown.
5. Washer
6. Quick Release
   • Rotate 180° to the left to remove.
   • When installing, the connection must engage when rotating.
7. Spring Nut
   • Slide sideways into the crossbrace.