Replacing The Lower Frame

NOTE:

If The Lower Frame Will Be Replaced, Remove The Seat Position Sensor And Install It In The New Lower Frame.

-- Separate the upper and lower frames. Refer to SEPARATING THE UPPER FRAME FROM THE LOWER FRAME .

-- Remove The Seat Position Sensor:

Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING, WITH PASSENGER OCCUPANT DETECTION SYSTEM SENSOR FOR BELT FASTENING DETECTION .
Refer to SEAT POSITION SENSOR WITH PASSENGER OCCUPANT DETECTION SYSTEM FOR PASSENGER AIRBAG DEACTIVATION, REMOVING AND INSTALLING .

-- Disconnect the electrical connector on the seat forward/back adjustment motor.

-- Install the removed electrical and electronic components and wires in the new lower frame.