Overview - Seat Angle Adjuster

Fig 1: Exploded View Of Seat Pan, Seat Angle Adjuster (Manual)

Courtesy of AUDI OF AMERICA, LLC

Handle
- For seat inclination adjustment
- Removing and installing. Refer to SEAT ANGLE ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
Clip
- Replace the seat angle adjustment handle each time it is removed
- Installed position. Refer to THE SPRINGS -ARROWS- (QUANTITY: 2) ON THE CLIP -2- MUST BE ON THE INNER SIDE OF THE LEVER -1-.
Bolt
- 6.5 Nm
- Always replace
- Threaded holes for screws must always be cleaned, for example, with thread cutter
- Self-locking
Shoulder Pin
- 6 Nm
- Always replace
- Threaded holes for screws must always be cleaned, for example, with thread cutter
- Self-locking
Seat Angle Adjuster
- Removing and installing. Refer to SEAT ANGLE ADJUSTER, REMOVING AND INSTALLING .