Wheel Hub, Removing From Wheel Bearing

Fig 1: Identifying Tool Set Up

Courtesy of AUDI OF AMERICA, LLC

-- Install special tools as shown in illustration.

1. :VW 412 
2. Sleeve:T10230/3  from the :T10230 
3. Thrust piece:T10230/8  from the :T10230 
4. Wheel bearing unit
5. :VW 402 
6. :VW 401 

-- Press the wheel hub out of the wheel bearing.

Remove The Bearing Inner Race From The Hub.

Fig 2: Bearing Inner Race & Spinning Washer

Courtesy of AUDI OF AMERICA, LLC

-- Insert the separating tool between the bearing inner race -1- and the wheel hub -2- and pretension with the spindle.

-- Install special tools as shown in illustration.

Fig 3: Identifying Tool Set Up

Courtesy of AUDI OF AMERICA, LLC

1. :VW 412 
2. Sleeve:T10230/3  from the :T10230 
3. Thrust piece:T10230/3  from the :T10230 
4. :Kukko 15/3 With 17/3 

-- Press The Bearing Inner Race From The Hub.