Assembly Of Locking Collar/Synchronizer Hub For 1ST And 2ND Gear
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
-- Mount the locking collar -1- over the synchronizer hub -2- so that the wire tooth spacing on the locking collar -arrow A- and on the synchronizer hub -arrow B- align with each other.
- Synchronizer hub installed position: the higher inside collar -arrow C- is facing the 2nd gear wheel.
-- Then place thrust pieces -3- in synchronizer hub and press thrust pieces into notches -arrows D- in locking collar.