LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S5 3.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 483 (Heating, Ventilation & Air Conditioning (2 Of 2) (Sedan)) >> 87 Air Conditioning >> Battery Cooling Module >> Traction Battery -A2- FRONT OUTLET AIR GUIDE, REMOVING AND INSTALLING >> Removing

Traction Battery -A2- FRONT OUTLET AIR GUIDE, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the luggage compartment floor covering. Refer to OVERVIEW - LUGGAGE COMPARTMENT FLOOR .

-- Disconnect the connectors -1- and free up the wiring harness -arrows-.

Fig 1: Identifying Wiring Harness Components
GWWA87-11131Courtesy of AUDI OF AMERICA, LLC

-- Remove the left and right bolts -1 and 5-, if equipped.

Fig 2: Identifying Front Outlet Air Guide Components
GWWA87-11132Courtesy of AUDI OF AMERICA, LLC

-- Open the left and right tabs -2- and remove the front outlet air guide -3- from the battery cooling module -8-.

-- Unclip and remove the front outlet air guide from the retainers -6- on the air guides -4- and -7-.