Bumper Cover Gap Dimension
- A - Rear Bumper Cover to the Bottom of the Rear Lid
- Gap dimension -a- = 5.0 mm
-1- Bumper cover
-2- Rear lid
- B - Rear Bumper Cover to the Side of the Rear Lid
- Gap dimension -b- = 3.7 mm
-1- Bumper cover
-2- Rear lid
- C - Rear Bumper Cover to the Outer Tail Lamp Assembly
- Gap dimension -c- = 1.5 mm
-1- Bumper cover
-3- Outer tail lamp assembly
- D - Rear Bumper Cover to the Rear Side Panel
- Zero gap
-1- Bumper cover
-4- Rear side panel