Attachments, Removing And Installing, Except AUDI RS5: Installing

• Tightening specification. Refer to OVERVIEW - BUMPER COVER, EXCEPT AUDI RS5 .

Install in reverse order of removal. Note the following:

-- When pressing on, make sure the end points are guided into the bumper cover before pressing on for the final time.

Trim Strip 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Removing

-- Remove the lower section of the bumper cover. Refer to ATTACHMENTS, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .

-- Remove the bolts -arrows-.

-- Remove the trim molding -1- forward from lower section of the bumper cover -2-.

Installing 

• Tightening specification. Refer to OVERVIEW - BUMPER COVER, EXCEPT AUDI RS5 .

Install in reverse order of removal. Note the following:

-- Install the lower section of the bumper cover. Refer to ATTACHMENTS, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .