Impact Member, Removing And Installing, Vehicles From My 2012: Removing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

When installing, bring all cable ties back to same positions.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Unclip air duct -1-, if applicable.

-- Disconnect the connector -4- from the horns.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull the release button -5- and am free up the impact member to remove the windshield washer fluid hose -6-.

-- Remove the nuts -7- and bolts -2- upward.

-- Remove the impact bar -1- from the mounts -3-.

NOTE:

Pry the impact bar out of the mounts if it is not easy to remove.