Bumper Cover, Removing And Installing, AUDI RS5: Removing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the bolts -arrows-.

-- Remove the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING, AUDI RS5 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -1- for the front parking aid sensor.

-- In equipped, remove the Garage Door Opener Control Module -J530- -item 2-. Refer to CONTROL MODULES .

-- Remove the bolts -arrows-.

-- Disengage the side walls on the front side panel and remove the bumper cover forward.