Left Flange Shaft, Removing And Installing: Removing
WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Secure the transmission on the Engine And Transmission Holder VAS6095, refer to SECURING ON ENGINE AND TRANSMISSION HOLDER .
-- Tilt the transmission back on the engine/transmission holder so the transmission fluid does not drain out.
-- Remove the bolts -arrows- from the flange shaft mounting bracket.
NOTE:
Ignore -arrow 2, B-.
-- Remove the left flange shaft -1- from the transmission in direction of -arrow A-.
Fig 2: Install Left Flange Shaft Into Transmission When Doing This, Insert Flange Shaft Centrally Into Shaft Seal On Front Differential
-- Remove the torque converter, refer to TORQUE CONVERTER, REMOVING AND INSTALLING .