LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S4 Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Hydraulic Components (Sedan) (As Of 09.2011) >> 47 Hydraulic Components >> Removal And Installation >> Rear Brakes >> Rear Brakes Guide Pins And Protective Caps >> Removing

Rear Brakes Guide Pins And Protective Caps: Removing

-- Remove the bolts -1- on the brake caliper.

Fig 1: Brake Caliper, Servicing Overview
GWWA47-0199Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake caliper.

NOTE:

Do not let the brake caliper hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.

-- Remove the protective cap -9- from the nut on the brake carrier.

Fig 2: Brake Caliper, Servicing Overview
GWWA47-0199Courtesy of AUDI OF AMERICA, LLC

-- Remove the guide pins -8- from the brake carrier.

-- Remove the protective cap from the guide pin.