LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S4 Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Hydraulic Components (Sedan) (As Of 09.2011) >> 47 Hydraulic Components >> Removal And Installation >> Front Brakes, FN-3 >> Bushing And Guide Pins, FN-3 Brakes >> Removing

Bushing And Guide Pins, FN-3 Brakes: Removing

-- Loosen the brake caliper at the pins -12-.

Fig 1: Identifying Brake Caliper Components
GWWA46-10111Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake caliper.

NOTE:

Do not let the brake caliper hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.

-- Remove the bushing from the brake caliper.

scientia non olet · About LEMON Manuals