LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S4 Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Hydraulic Components (Sedan) (As Of 01.2014) >> 47 Hydraulic Components >> Vacuum System >> Check Valve, Removing And Installing >> Check Valve, Removing And Installing, RS 5 >> Removing

Check Valve, Removing And Installing, RS 5: Removing

-- Open the hose clamp on the vacuum hose using suitable pliers.

-- Disconnect the vacuum hose from the pump.

-- Remove the vacuum hose on the left and right of the check valve -3-.

Fig 1: View of Brake System Vacuum Pump -V192-
GWWA47-10071Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Be careful not to kink or damage the vacuum hose. Replace the vacuum hose if damaged.

-- Remove the check valve from the vehicle.