Brake Caliper Piston, Removing And Installing, Ceramic Brakes 1LW: Removing
- Brake caliper is removed
- Brake caliper, removing, ceramic brakes. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, CERAMIC BRAKES 1LW .
-- Force piston from brake caliper housing, one at a time, using compressed air.
Only one piston can be pressed out at a time. Hold the opposing piston in the brake caliper housing using the piston resetting tool -a-. Block the other pistons, for example, using wooden blocks -b-. In addition, place a wooden board -c- in front of the piston resetting tool so that the piston will not be damaged when pressed out.
-- Remove the seal with the Trim Removal Wedge 3409.
When removing, make sure that surface of cylinder is not damaged.