LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S4 Automatic DCT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.0L - Crankshaft & Cylinder Block - Engine Code(S): CCBA, CGXC & CTUB (Sedan) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Drive Plate, Removing And Installing >> Removing

Drive Plate, Removing And Installing: Removing

Fig 1: Drive Plate Overview
GWWA13-10517Courtesy of AUDI OF AMERICA, LLC

-- Insert the Counterhold - Flywheel 10-201 to loosen the bolts.

CAUTION:

The outer surface of the bearing flange at the drive plate could be damaged.

  • Use a multipoint socket wrench with a shaft at least 40 mm long to loosen and tighten the drive plate bolts.

-- Remove the bolts, drive plate and sensor wheel.

scientia non olet · About LEMON Manuals