Input Shaft Seal, Replacing, 0BE, 0BF: Notes

Special tools and workshop equipment required 

• Puller - Multiple Use VW391
• Puller - Unit Injector T10055
• -2- Puller - Unit Injector - Adapter 2 T10055/2
• Two M 8 x 30 Bolts
• Seal Installer - Hollow Shaft T10380
• Seal Installer - Input Shaft T40222
• Seal Installer - Input Shaft - Guide Sleeve T40222/1
• Sealing Grease G 052 128 A1
• Inductive Heater VAS6414
• or
• Commercially Available Hot Plate
• and
• Digital Thermometer VAS6519