Overview - Final Drive 0BC, 0BD: Notes

Rear Final Drive 

Fig 1: Overview Of Final Drive 0BC, 0BD

Courtesy of AUDI OF AMERICA, LLC

1. Subframe
   • Removing and installing. Refer to OVERVIEW - SUBFRAME .
2. Bolt
   • 95 Nm
3. Bolt
   • 55 Nm
4. Bolt
   • 55 Nm
   • Depending on the date of manufacture for the balance weight fastener. Refer to OVERVIEW - FINAL DRIVE 0BC, 0BD - BALANCE WEIGHT ON THE REAR FINAL DRIVE .
5. Heat Shield
6. Bolt
   • 20 Nm
7. Driveshaft
   • Removing and installing. Refer to DRIVE AXLE, REMOVING AND INSTALLING .
8. Rear Final Drive
   • Versions with balance weight. Refer to OVERVIEW - FINAL DRIVE 0BC, 0BD - BALANCE WEIGHT ON THE REAR FINAL DRIVE .
   • Refer to FINAL DRIVE, REMOVING AND INSTALLING 
9. Driveshaft
   • Removing and installing. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
   • Removing and installing on the rear final drive. Refer to DRIVESHAFT, REMOVING AND INSTALLING FROM REAR FINAL DRIVE .
10. Crossmember