Rear Final Drive 0BE - Replacing, Flange/Driveshaft Shaft Seal: Notes

Special tools and workshop equipment required 

• Press Piece - Multiple Use VW431
• Puller - Unit Injector T10055
• Puller - Unit Injector - Adapter 2 T10055/2
• Seal Installer - Hollow Shaft T10380
• Seal Installer - Propshaft T40247
• Seal Installer - Propshaft - Guide Sleeve T40247/1
• -1- Puller - Kukko 2-Arm - 70-180mm 20/10
• Inductive Heater VAS6414
• or
• Commercially Available Hot Plate
• and
• Digital Thermometer VAS6519
• Drip Tray
• Sealing Grease G 052 128 A1