LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S4 Automatic DCT >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Hydraulic Components (Sedan) (As Of 09.2011) >> 47 Hydraulic Components >> Removal And Installation >> Brake System Vacuum Pump -V192- BRACKET >> Removing

Brake System Vacuum Pump -V192- BRACKET: Removing

-- Remove the engine cover.

-- Remove the vacuum pump, refer to Brake System Vacuum Pump -V192- .

-- Remove the two nuts -6- on the bracket.

Fig 1: Identifying Vacuum Pump Assembly Overview
GWWA47-10053Courtesy of AUDI OF AMERICA, LLC

-- Remove the bracket from the vehicle.