LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S4 Automatic DCT >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Hydraulic Components (Sedan) (As Of 01.2014) >> 47 Hydraulic Components >> Front Brake Caliper >> Bearing Bushing And Guide Pin, Replacing >> Bearing Bushing And Guide Pin, Replacing, 1LT >> Removing

Bearing Bushing And Guide Pin, Replacing, 1LT: Removing

-- Loosen the brake caliper at the pins -12-.

Fig 1: Identifying Brake Caliper Components
GWWA46-10111Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake caliper.

Do not let the brake caliper hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.

-- Remove the bushing from the brake caliper.

scientia non olet · About LEMON Manuals