Removing and Installing

Headlamp Washer System Spray Nozzle Cover: 

Removing 

-- Fold the washer nozzle cover -1- upward in direction of -arrow A-.

-- Using a screwdriver on the inner side, pry the spray nozzle cover -1- off the mount -2- in direction of -arrow B- and disengage it at the opposite side.

Fig 1: Prying Off Spray Nozzle Cover

Courtesy of AUDI OF AMERICA, LLC

Installing 

Install in reverse order of removal. Note the following:

-- Press the spray nozzle cover on until it engages audibly.

Spoiler Lip: 

Removing 

-- Remove the expanding pin -3- with the expanding clip -2-.

-- Remove the spoiler lip -1-.

Fig 1: View Of Spoiler Lip Fasteners

Courtesy of AUDI OF AMERICA, LLC

Installing 

Install in reverse order of removal.

Front Bumper Cover End Plate: 

Removing 

-- Remove the bolts -1- and -2-.

-- Pull the front bumper cover end plate back.

Fig 1: Identifying Bolts & Front Bumper Cover End Plate

Courtesy of AUDI OF AMERICA, LLC

Installing 

• 3 Nm

Install in reverse order of removal.