Traction Battery -A2- INLET AIR GUIDE, REMOVING AND INSTALLING: Installing
Installation is carried out in the reverse order while observing the following.
NOTE:
Use a bolt -5- to attach the air guide to the battery cooling module -6- and use bolts -2 and 3- to attach the left -1- and right -4- air guides if the retainers no longer hold or if one of the tabs breaks off.
-- Clip the inlet air guide inside the battery cooling module -6- -arrow B- first, then install the left -1- and right -4- air guides -arrows A-.
-- Install the removed parts in the opposite order