Fresh Air Intake, Removing And Installing: Notes
NOTE:
Depending on the version, for some countries with high dust levels (for example China), a dust filter -C- is installed in the filter mount -B- instead of the intake grille -A-. The dust filter -C- prevents pollen and sand from getting sucked into the Fresh Air Blower -V2- .
Make sure when removing the dust filter -C- that dirt does not fall into the A/C intake shroud.
The dust filter -C- is held in the filter mount -B- with the tab -D-.
Note the replacement interval for the dust filter -C-. Refer to Maintenance Table
Clean the air intake shroud and the area around the dust filter -C- in the plenum chamber before installing a new filter.
Pay attention to the air flow direction -arrows- when installing the dust filter -C-.