Right Footwell Vent Temperature Sensor -G262-, REMOVING AND INSTALLING: Removing

-- Move the passenger seats as far back as possible.

-- Turn off the ignition.

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Remove the right footwell vent (front passenger side) -C-. Refer to FRONT PASSENGER SIDE FOOTWELL VENT, REMOVING AND INSTALLING .

-- Disconnect the connector -A-.

-- Turn the sensor -D- 90° and remove it from the right footwell vent -C-.

Fig 1: Disconnecting Harness Connector From Right Footwell Vent Temperature Sensor

Courtesy of AUDI OF AMERICA, LLC