LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> Q5 3.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 530 (Exterior Body Panels (Hood, Lids) (Sedan)) >> (55 Hood, Lids) >> Rear Lid >> Rear Lid Seal, Removing And Installing >> Rear Lid Seal, Removing And Installing, AVANT >> Additionally Sealing the Body Flange

Additionally Sealing the Body Flange

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- For vehicles through MY 2011, the joint on the body flange -arrows- must also be sealed with Sealant D 476 KD7 A3 when replacing the rear lid seal.

Fig 1: Identifying Body Flange Joints -Arrows-
GWWA55-10844Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals