Backrest Cover And Padding With Pass-Through, Removing And Installing: Removing

Fig 1: Identifying Profiles -3- On Back Of Backrest -2- -Arrow- And Cover -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left two third rear seat. Refer to REAR SEAT, REMOVING AND INSTALLING .

-- Remove the rear headrests. Refer to HEADREST, REMOVING AND INSTALLING .

-- Remove rear headrest guides. Refer to HEADREST GUIDE, REMOVING AND INSTALLING .

-- Remove the pass-through door. Refer to PASS-THROUGH COVER, REMOVING AND INSTALLING .

-- Remove the rear center belt guide. Refer to REAR SEAT BELT COVER IN CENTER SEATING POSITION, REMOVING AND INSTALLING .

-- Remove the center rear belt end fitting. Refer to REAR SEAT BELT ANCHOR IN CENTER SEATING POSITION, REMOVING AND INSTALLING .

-- Pry off the retaining strips -3- on the back side of the backrest frame -2- and remove it all the way around -arrow-.

-- Remove the lower cover and cushion -1- between the seat frame and backrest frame.