Overview - Cover And Upholstery, Standard, Comfort, Folding Seat

Fig 1: Overview Of Cover And Upholstery, Standard, Comfort, Folding Seat

Courtesy of AUDI OF AMERICA, LLC

1. Lower Seat Frame
2. Cushion
   • With foam-encased wire
   • Cover with upholstery, removing and installing SEAT PAN COVER AND UPHOLSTERY, REMOVING AND INSTALLING, STANDARD, COMFORT SEAT .
   • Cover, Separating from Cushion and Connecting. Refer to LOWER SEAT FRAME COVER AND CUSHION, SEPARATING, STANDARD, COMFORT, FOLDING SEAT .
3. Wire
   • In foam in upholstery
   • For securing cover to upholstery
4. Cushion Clip
   • For securing cover to upholstery
   • Always replace if removed
   • Install in same location as before removal
5. Contour Strip/Contour Wire
   • Contour wire installed into the cover pocket (on the Comfort seat only)
   • Contour strip sewn into the cover
   • For securing cover to upholstery
6. Cover
   • Cover with upholstery, removing and installing, standard/comfort seat. Refer to SEAT PAN COVER AND UPHOLSTERY, REMOVING AND INSTALLING, STANDARD, COMFORT SEAT .
   • Cover with upholstery, removing and installing, folding seat. Refer to LOWER SEAT FRAME COVER AND CUSHION, REMOVING AND INSTALLING, FOLDING SEAT .
   • Cover, Separating from Cushion and Connecting. Refer to LOWER SEAT FRAME COVER AND CUSHION, SEPARATING, STANDARD, COMFORT, FOLDING SEAT 
7. Clamping Strip
   • Sewn into cover
   • For attaching the rear cover to the upper seat frame
8. Rubber Strap
   • Quantity: 2
9. Clamping Strip
   • Sewn into cover
   • For attaching the cover on the front and side areas of the upper seat frame