Overview - Backrest Cover And Cushion, Standard, Comfort, Sport Seat

Fig 1: Overview Of Backrest Cover And Cushion, Standard, Comfort, Sport Seat

Courtesy of AUDI OF AMERICA, LLC

1. Clamping Strip
   • Sewn into cover
   • For attaching the cover on the rear backrest frame
2. Cover
   • Cover with upholstery, removing and installing. Refer to BACKREST COVER AND UPHOLSTERY, REMOVING AND INSTALLING, STANDARD, COMFORT, SPORT SEAT 
   • Cover, Separating from Cushion and Connecting. Refer to BACKREST COVER AND CUSHION, SEPARATING .
3. Contour Strip
   • Sewn into cover
   • For securing cover to upholstery
4. Cushion Clip
   • For securing cover to upholstery
   • Always replace if removed
   • install in same location as before removal
5. Wire
   • In foam in upholstery
   • For securing cover to upholstery
6. Backrest Frame
7. Cushion
   • Cover with upholstery, removing and installing. Refer to BACKREST COVER AND UPHOLSTERY, REMOVING AND INSTALLING, STANDARD, COMFORT, SPORT SEAT 
   • Cover, Separating from Cushion and Connecting. Refer to BACKREST COVER AND CUSHION, SEPARATING 
8. Pocket
   • For side airbag
   • Sewn into cover