LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> Q5 3.2 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Upholstery & Covers >> 74 Seat Upholstery, Covers >> Rear Seat Covers And Cushions >> Headrest Cover And Cushion Assembly Overview

Headrest Cover And Cushion Assembly Overview

NOTE:

A leather headrest is shown in the illustration. Because the headrest with fabric cover is not disassembled, that version is not shown in the assembly overview.

Fig 1: Identifying Headrest Cover And Upholstery
GWWA74-10291Courtesy of AUDI OF AMERICA, LLC
  1. Headrest Support
    • With padding
    • Vehicles with: Leather cover
    • The headrest support is in the upholstery and cannot be separated
  2. Cover
    • Vehicles with: Leather cover
    • Removing and installing. Refer to HEADREST COVER AND CUSHION, REMOVING AND INSTALLING .
      CAUTION:

      It is only possible to replace the cover on the headrest with a leather cover. It is not possible to replace a fabric headrest cover because the cover is filled with foam and also serves as the casing for the upholstery.

  3. Locking Strip
    • Flat strip and U-strip