Tail Lamp, Removing And Installing: Removing

Fig 1: Removing Bumper Cover Tail Lamp Cap

Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Turn the headlamp switch to "0".

-- Push the cap -1- on the outer side -arrow- toward the inside.

-- Remove the cap and let it hang.

-- Remove the bolt -1-.

Fig 2: Identifying Tail Lamp Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove the tail lamp -2- from the bumper cover.

-- Disconnect the connector -3- on the central connector.