Inner Bulb Holder, Removing And Installing: Removing

Fig 1: Removing Connector Mount

Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Turn the headlamp switch to "0".

-- Insert a screwdriver -2- into the opening and pry out the cap -1- from the inside in direction of -arrow-.

-- Turn the socket -1- counterclockwise.

Fig 2: Removing Inner Bulb Holder

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bulb socket from the tail lamp housing.

-- Remove the bulb from the socket.