Access/Start Authorization Switch -E415-, Removing And Installing: Notes
Special Tools And Workshop Equipment Required
- Ignition Lock Pliers VAS6339
NOTE:
Induction coil for immobilizer is secured to Access/Start Authorization Switch -E415- and cannot be replaced separately.
If induction coil is malfunctioning, Access/Start Authorization Switch -E415- must be replaced.
The immobilizer does not need to be adapted if the access/start authorization switch is replaced.
Lock in access/start authorization switch is not coded mechanically.
Keys must therefore not be replaced when access/start authorization switch is replaced; present keys continue to match.
WARNING:
Danger Of Unintended Engine Ignition
Turn off the ignition and remove the ignition key from the vehicle interior for all work performed on the high voltage vehicle.