Access/Start Authorization Switch -E415-, Removing And Installing: Installing

• Tightening specification, refer to Figure.

Install In Reverse Order Of Removal. Note The Following:

-- Install the center instrument vent, refer to INSTRUMENT PANEL VENTS AND REAR VENTS, REMOVING AND INSTALLING .

-- On USA vehicles, install the right impact absorber, refer to BUMPER, REMOVING AND INSTALLING .

-- Install the driver side instrument panel cover, refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

Connector Assignment For Access/Start Authorization Switch -E415- 

3  - Not Assigned

4  - Not Assigned

5  - S-contact

6  - Terminal 15

7  - LIN

8  - Terminal 30

9  - Not Assigned

10  - Not Assigned

11  - Not Assigned

12  - Not Assigned

13  - RED2, terminal 15

14  - RED, terminal 15

15  - Ignition/starter switch +

16  - Terminal 31