Left/Right Position Lamp Bulb -M1- / -M3-, Removing And Installing, Halogen Headlamps From My 2013: Installing

Install In Reverse Order Of Removal. Note The Following: 

-- Connect the connector and insert the new bulb in the housing. Do not touch the glass bulb with bare hands.

-- Install the bulb socket into the mount on the headlamp housing and lock it in place.

-- Close the housing cover and secure with the clips.

• While doing this, the guide tab must engage in the mount.

-- On the right: install the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .