Left/Right Daytime Running Lamp And Position Lamp Led Module -L176- / -L177-, Removing And Installing, Hid Headlamps Through My 2012: Removing
-- Turn the light switch to position "0".
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- Do not touch the flasher.
-- On the right: remove the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Open the retainer -2- -arrow-.
-- Move the housing cover -1- to the side and remove it.
-- Take out bolts -2- and -4- and remove the LED module -3- from the mount.
-- Squeeze the clips -arrows- and disconnect the LED module connector -1-.