Left/Right Daytime Running Lamp And Position Lamp Control Module -J860- / -J861-, Removing And Installing: Installing

• Tightening specification, refer to OVERVIEW - HEADLAMP, HID HEADLAMPS FROM MY 2013 .

Install In Reverse Order Of Removal. Note The Following: 

-- Make sure the seal -1- between the control module and the housing cover is not damaged.

-- Close the housing cover and secure with the clips.

• While doing this, the guide tab must engage in the mount.

-- On the right: install the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .