Fog Lamp, Adjusting: Procedure
-- The vehicle must be standing on a flat surface.
-- Turn the headlamp switch to "low beam" - not "Auto".
-- Pull the headlamp switch to "fog lamp".
-- During the program, you will be asked to perform a headlamp adjustment.
Headlamp Adjustment
-- To adjust headlamp range, turn the adjusting screw -arrow-.
- Angle dimension: 2%
NOTE:
The percentage indicator is based on a 10 meter projection distance. At an angle dimension of 2.0%, for example, converts to 20 cm.
Side adjustment is not intended.