Footwell Vent Temperature Sensor -G192- /Left Footwell Vent Temperature Sensor -G261-, REMOVING AND INSTALLING: Removing

-- Move the driver seat as far back as possible.

-- Turn off the ignition.

-- Remove the storage compartment under the instrument panel on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -A-.

Fig 1: Removing Footwell Vent Temperature Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Turn the sensor -B- 90° and remove it from the left (driver side) footwell vent.