Meter Illumination does not Dim at Night [10/2013 - ]: Description

WARNING: This page is about a different car, the 2014 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

In this circuit, the combination meter assembly receives auto dimmer signals from the main body ECU (multiplex network body ECU) using the CAN communication system. When the combination meter assembly receives an auto dimmer signal, it dims the meter illumination (warning and indicator lights). The main body ECU (multiplex network body ECU) determines whether it is daytime or nighttime based on the waveform transmitted from the automatic light control sensor. If the main body ECU (multiplex network body ECU) determines that it is nighttime and the headlight dimmer switch is in the tail, head, or AUTO position, the ECU sends an auto dimmer signal to the combination meter assembly. According to this signal, the combination meter assembly dims the meter illumination.

HINT:

When the meter illumination does not dim at night, there may be a malfunction in the automatic light control sensor, main body ECU (multiplex network body ECU), CAN communication system, wire harness, connector, or combination meter assembly.