Charge Air Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg and 2013 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Hose connections and charge air system hoses must be free of oil and grease before installing.

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.

-- Replace the O-ring after removing.

-- Read the information for the charge air hose connections. Refer to OVERVIEW - CHARGE AIR HOSE CONNECTIONS .

Tightening Specifications:

Refer to OVERVIEW - CHARGE AIR SYSTEM
Refer to OVERVIEW - CHARGE AIR HOSE CONNECTIONS
Refer to OVERVIEW - BUMPER COVER .
Refer to OVERVIEW - NOISE INSULATION .