Transmission Control Module J217
WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- Component location: the Transmission Control Module -J217- is at the back of the transmission, secured directly to hydraulic control module.
The Following Components Are Integrated Inside The Transmission Control Module -J217- :
- Connector to the hydraulic control unit, on Solenoid Valve 1 -N88-
- Connector to the hydraulic control module, on the Automatic Transmission Pressure Regulating Valve 2 -N216-
- Connector to the hydraulic control module, on the Automatic Transmission Pressure Regulating Valve 1 -N215-
- Transmission Input Speed Sensor -G182- and Transmission Input Speed Sensor 2 -G612-
- Automatic Transmission Hydraulic Pressure Sensor 1 -G193-
- Multifunction Transmission Range Switch -F125-
- Automatic Transmission Hydraulic Pressure Sensor 2 -G194-
- Transmission Output Speed Sensor -G195-
NOTE:
On Board Diagnostics (OBD) monitors the Transmission Control Module -J217-.
Removing and installing. Refer to TRANSMISSION CONTROL .