Seat Heating Element -Z6- / -Z8-, Removing And Installing, Comfort Seat: Removing
-- Disconnect cover from upholstery. Refer to LOWER SEAT FRAME COVER AND CUSHION, SEPARATING, STANDARD, COMFORT, FOLDING SEAT .
-- Cut the electrical wire -3- off directly at the old backrest heating element -2-.
-- Loosen the heating surfaces -A- and -B- from the adhesive and remove.
NOTE:
The spacer fabric must not be damaged.
The old heating surfaces -C and D- remain on the cushion -1- and will be covered over by the new heating element.