LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> Q5 2.0T >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> EXTERIOR LIGHTS, SWITCHES (2 of 2) (CABRIOLET) >> 94 Exterior Lights, Switches >> Headlamps >> Left/Right Hid Headlamp Control Module -J343- / -J344-, Removing And Installing >> Printed Circuit Board, Removing And Installing >> Notes

Printed Circuit Board, Removing And Installing: Notes

CAUTION:

Danger of causing damage to the vehicle electronics.

  • Requirement: Make sure nothing, especially metal or other light weight particles, can get into the headlamp housing.
  • Make sure also no oil, grease, silicone or other such materials can get into an open headlamp, otherwise they can turn into steam and fog up the headlamp.
  • Touching electronic circuits with bare hands can lead to migration.
  • ESD (electro static discharge) protection: Always follow standard DIN EN 613-40-5-1 when handling.
  • Do not use any components or electronics that have fallen down.
  • ESD (electro-static discharge) work surface VAS6613. Refer to ESD Work Surface VAS6613 . .
scientia non olet · About LEMON Manuals