LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> Q5 2.0T >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> EXTERIOR LIGHTS, SWITCHES (2 of 2) (CABRIOLET) >> 94 Exterior Lights, Switches >> Headlamps >> Left/Right Hid Headlamp Control Module -J343- / -J344-, Removing And Installing >> Left/Right Hid Headlamp Control Module -J343- /J344, Removing And Installing, From My 2013 >> Removing

Left/Right Hid Headlamp Control Module -J343- /J344, Removing And Installing, From My 2013: Removing

Fig 1: Removing HID Headlamp Control Module (From MY 2013)
GWWA94-11468Courtesy of AUDI OF AMERICA, LLC

-- Turn the light switch to position "0".

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Do not touch the flasher.

-- On the right: remove the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

-- Remove the control module -4- from the headlamp housing.

-- Disconnect the adapter cable -2- and the connector -3-.

-- Remove the control module.