LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> Q5 2.0T >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> EXTERIOR LIGHTS, SWITCHES (2 of 2) (CABRIOLET) >> 94 Exterior Lights, Switches >> Headlamps >> Left/Right Front Turn Signal Bulb -M5- / -M7-, Removing And Installing >> Left/Right Front Turn Signal Bulb -M5- / -M7-, Removing And Installing, Hid Headlamps From My 2013 >> Removing

Left/Right Front Turn Signal Bulb -M5- / -M7-, Removing And Installing, Hid Headlamps From My 2013: Removing

-- Turn the light switch to position "0".

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Do not touch the flasher.

-- On the right: remove the air filter housing, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

Fig 1: Headlight Access Cover (HID Headlamps From MY 2013)
GWWA94-11467Courtesy of AUDI OF AMERICA, LLC

-- Release the retaining tabs -4 and 5-.

-- Remove the housing cover -3-.

-- Press down on release -2- to disconnect the connector -1-.

-- Disengage bulb socket -1- counter-clockwise -arrow-.

Fig 2: Removing Bulb Socket From Housing
GWWA94-11533Courtesy of AUDI OF AMERICA, LLC

-- Pull the bulb socket out of the housing.

-- Press the release -arrow- and remove the connector -2- from the socket -1- with the bulb.

Fig 3: Identifying Bulb & Connector
GWWA94-10658Courtesy of AUDI OF AMERICA, LLC